KY 97A
- VHF Communications Transceiver with Liquid Crystal Display
- Operates 760 frequencies from 118.00 to 136.975 MHz (version dependent, see table below)
- Flip-flop frequency switch to transfer between active and standby frequencies
- Remote switch may be installed as an additional means of providing flip-flop function
- 9 programmable memory channels in addition to the two displayed frequencies
- Non-volatile frequency storage without batteries or external battery hookup
- Audio leveling automatically amplifying weak audio signals and muting those which are too strong
- Stuck microphone indication through flashing display
- 5W minimum power output
- Models available with 25kHz or 50kHz selectivity, with different audio outputs
- Same as KY-96A VHF Comm but KY-97A operates on 14V only
- TSO'd
| DIMENSIONS |
6.25"W x 1.3"H x 10.50"L |
|
WEIGHT |
2.9 lbs |
|
TEMPERATURE RANGE |
-20 to 55°C |
|
FREQUENCY RANGE |
118.00 to 136.975MHz in 25kHz increments |
| DUTY CYCLE |
1 minute on, 4 minutes off |
|
POWER OUTPUT |
5W minimum |
|
MODUALTION |
70% modulation with 90% limiting. Less than 15% distortion at 70% modulation |
|
RECEIVER SENSITIVITY |
2uV (hard) or less for 6dB S N/N with 1KHz tone modulated 30% |
|
TSO COMPLIANCE (TRANSMITTER |
TSO C37c, Class 4 |
|
TSO COMPLIANCE (RECEIVER) |
TSO C38c, Class C & D (-60 model); TSO C38c, Class A & B (-61 model) |
| PART NUMBER | DESCRIPTION |
|
064-1051-10 |
25kHz receiver selectivity, 500ohm headphone audio output, 720 channels |
|
064-1051-30 |
25kHz receiver selectivity, 500ohm headphone audio output, 760 channels |
|
064-1051-50 |
25kHz receiver selectivity, 4W into 4ohm audio output, 720 channels |
|
064-1051-51 |
50kHz receiver selectivity, 4W into 4ohm audio output, 720 channels |
|
064-1051-60 |
25kHz receiver selectivity, 4W into 4ohm audio output, 760 channels |
|
064-1051-61 |
50kHz receiver selectivity, 4W into 4ohm audio output, 760 channels |
|
064-1051-70 |
Crown series version of -60 unit with solid black face and no silver lining trim |